EasyManuals Logo

Planet SGS-6341-24T4X User Manual

Planet SGS-6341-24T4X
1206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #140 background imageLoading...
Page #140 background image
SGS-6341 Series Command Guide
4-140
Function:
Test the link of the twisted pair cable connected to the Ethernet port. The response may include: well, short, open, fail.
If the test information is not well, the location of the error will be displayed (how many meters it is away from the
port).
Command mode:
Port Configuration Mode.
Default:
No link test.
Usage Guide:
The RJ-45 port connected with the twisted pair under test should be in accordance with the wiring sequence rules of
IEEE802.3, or the wire pairs in the test result may not be the actual ones. On a 100M port, only two pairs are used: (1,
2) and (3, 6), whose results are the only effective ones. If a 1000M port is connected to a 100M port, the results of (4,
5) and (7, 8) will be of no meaning. The result may have deviations according to the type of the twisted pair, the
temperature, working voltage and other conditions. When the temperature is 20 degree Celsius, and the voltage is
stable without interference, and the length of the twisted pair is no longer than 100 meters, a deviation of +/-2 meters
is allowed. Notice: the test procedure will block all data flow on the line for 5-10 seconds, and then restore the original
status.
Notice: combo port support VCT function detection only at copper cable port mode.
568A wiring sequence: (1 green white, 2 green), (3 orange white, 6 orange), (4 blue, 5 blue white), (7 brown white, 8
brown).
568B wiring sequence: (1 orange white, 2 orange), (3 green white, 6 green), (4 blue, 5 blue white), (7 brown white, 8
brown).
Example:
Test the link status of the twisted pair connected to the 1000M port 1/0/25.
Switch(config)#interface ethernet 1/0/25
Switch(Config-If-Ethernet1/0/25)#virtual-cable-test
Interface Ethernet1/0/25:
--------------------------------------------------------------------------
Cable pairs Cable status Error length (meters)
--------------- ----------------- --------------------------
(1, 2) open 5
(3, 6) open 5
(4, 5) open 5
(7, 8) short 5

Table of Contents

Other manuals for Planet SGS-6341-24T4X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Planet SGS-6341-24T4X and is the answer not in the manual?

Planet SGS-6341-24T4X Specifications

General IconGeneral
Switch typeManaged
Switch layerL3
Quality of Service (QoS) supportYes
Form factor1U
CertificationFCC Part 15 Class A, CE
Product colorBlack
Console portRJ-45
SFP+ module slots quantity4
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity24
Routing entries128
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN featuresStacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN
Copper ethernet cabling technology10BASE-T, 100BASE-T, 1000BASE-T
Flash memory16 MB
Internal memory512 MB
Processor frequency400 MHz
AuthenticationMAC-based authentication, Port-based authentication
Security algorithmsSNMPv3, SSH, SSL/TLS
Throughput95.24 Mpps
Jumbo frames9216
Number of queues8
MAC address table16000 entries
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power supply included-
Power consumption (max)19.9 W
Heat dissipation67.91 BTU/h
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 90 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth240 mm
Width440 mm
Height43.6 mm
Weight3170 g

Related product manuals