Planet SGS-6341-24T4X - Page 304

15-150
Not used by any Policy Map
Display Information
Explanation
aggregate policy a2 10 10 10 exceed-action drop
aggregate-policy configuration
Not used by any Policy Map
The time for using aggregate-policy
15.28 transmit
Command:
Transmit
no transmit
Function:
Transmit data package that match the class, the no command cancels the assigned action.
Parameters:
<aggregate-policy-name> the aggregate-policy name
Command mode:
Policy class map configuration mode.
Usage Guide:
Send the packet directly after configure this command.
Example:
Send the packet which satisfy c1.
Switch(config)#policy-map p1
Switch(Config-PolicyMap-p1)#class c1
Switch(Config-PolicyMap-p1-Class-c1)#transmit
Switch(Config-PolicyMap-p1-Class-c1)#exit
Switch(Config-PolicyMap-p1)#exit