Planet SGS-6341-24T4X - Page 341

19-187
19.2.25 ipv6 nd retrans-timer
Command:
ipv6 nd retrans-timer <seconds>
Function:
Set the retrans-timer of sending router advertisement.
Parameters:
<value> is the retrans-timer of sending router advertisement, ranging from 0 to 4294967295
milliseconds.
Command Mode:
Interface Configuration Mode.
Default:
The default retrans-timer of sending router advertisement is 1000 milliseconds.
Example:
Set the reachable-time of sending router advertisement in interface vlan 1 as 10000 milliseconds.
Switch#(Config-if-Vlan1)#ipv6 nd retrans-timer 10000
19.2.26 ipv6 nd other-config-flag
Command:
ipv6 nd other-config-flag
Function:
Set the flag representing whether information other than the address information will be obtained via
DHCPv6.
Command Mode
：
Interface Configuration Mode.
Default:
Information other than the address information won’t be obtained via DHCPv6.
Examples:
Set IPv6 information other than the address information in interface vlan 1 will be obtained via
DHCPv6.
Switch#(Config-if-Vlan1)#ipv6 nd other-config-flag