EasyManuals Logo

Planet SGS-6341-24T4X User Manual

Planet SGS-6341-24T4X
1206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #416 background imageLoading...
Page #416 background image
27-55
prefix-delegation pool <poolname> [lifetime {<valid-time> | infinity} {<preferred-time> |
infinity}]
no prefix-delegation pool <poolname>
Function:
o configure prefix delegation name used by DHCPv6 address pool. The no form of this command
deletes the configuration.
Parameters:
<poolname> is the name of the address prefix pool, the length name string should be less than 32.
<valid-time> and <preferred-time> are the valid life time and the preferred life time of the IPv6
address allocated to the clients respectively, in seconds, and its value is allowed between 1 and
31536000.However, <preferred-time> should never be bigger than <valid-time>. If not configured,
the default <valid-time> will be 2592000, while <preferred-time> will be 604800. The infinity
parameter means the life time is infinity.
Command Mode:
DHCPv6 address pool configuration mode.
Default:
The prefix delegation name used by DHCPv6 address pool is not configured.
Usage Guide:
This command configures the name of the address prefix pool for address allocation. If configured,
the addresses in the prefix address pool will be allocated to the clients. This command can be used
in association with the ipv6 local pool command. For one address pool, only one prefix delegation
pool can be bound. When trying to remove the prefix name configuration, the prefix delegation
service of the server will be unavailable, if both the address pool is not associated with the prefix
delegation pool and no static prefix delegation binding is enabled.
Example:
Switch(dhcp-1-config)#prefix-delegation pool abc
27.23 service dhcpv6
Command:
service dhcpv6
no service dhcpv6
Function:
To enable DHCPv6 server function; the no form of this command disables the configuration.
Default:
Disabled.
Command Mode:

Table of Contents

Other manuals for Planet SGS-6341-24T4X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Planet SGS-6341-24T4X and is the answer not in the manual?

Planet SGS-6341-24T4X Specifications

General IconGeneral
Switch typeManaged
Switch layerL3
Quality of Service (QoS) supportYes
Form factor1U
CertificationFCC Part 15 Class A, CE
Product colorBlack
Console portRJ-45
SFP+ module slots quantity4
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity24
Routing entries128
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN featuresStacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN
Copper ethernet cabling technology10BASE-T, 100BASE-T, 1000BASE-T
Flash memory16 MB
Internal memory512 MB
Processor frequency400 MHz
AuthenticationMAC-based authentication, Port-based authentication
Security algorithmsSNMPv3, SSH, SSL/TLS
Throughput95.24 Mpps
Jumbo frames9216
Number of queues8
MAC address table16000 entries
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power supply included-
Power consumption (max)19.9 W
Heat dissipation67.91 BTU/h
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 90 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth240 mm
Width440 mm
Height43.6 mm
Weight3170 g

Related product manuals