Planet SGS-6341-24T4X - Page 533

34-172
Switch#debug ipv6 rip packet
Switch#1970/01/01 21:15:08 IMI: SEND[Ethernet1/0/10]: Send to [ff02::9]:521
1970/01/01 21:15:08 IMI: SEND[Ethernet1/0/2]: Send to [ff02::9]:521
1970/01/01 21:15:09 IMI: RECV[Ethernet1/0/10]: Receive from [fe80::20b:46ff:fe57:8e60]:521
1970/01/01 21:15:09 IMI: RECV[Ethernet1/0/10]: 3000:1:1::/64 is filtered by access-list dclist
1970/01/01 21:15:09 IMI: RECV[Ethernet1/0/10]: 3ffe:1:1::/64 is filtered by access-list dclist
1970/01/01 21:15:15 IMI: RECV[Ethernet1/0/2]: Receive from [fe80::203:fff:fe01:257c]:521
34.7 debug ipv6 rip redistribute message send
Command:
debug ipv6 rip redistribute message send
no debug ipv6 rip redistribute message send
Function:
To enable the debugging of sending messages for routing redistribution messages from OSPFv3 or
other external process for RIPng. The no form of this command will disable the debugging
messages.
Default:
Close the debug by default.
Command Mode:
Admin Mode.
Example:
Switch# debug ipv6 rip redistribute message send
Switch# no debug ipv6 rip redistribute message send
34.8 debug ipv6 rip redistribute route receive
Command:
debug ipv6 rip redistribute route receive
no debug ipv6 rip redistribute route receive
Function:
To enable the debugging switch received from NSM for redistribution of routing information for
RIPng. The no form of this command will disable the debugging switch.
Default: