Planet SGS-6341-24T4X - Page 599

36-238
Default:
Closed.
Command Mode:
Admin mode
Example:
Switch#debug ipv6 ospf nfsm
1970/01/01 01:14:07 IMI: NFSM[192.168.2.3-000007d4]: LS update timer expire
1970/01/01 01:14:07 IMI: NFSM[192.168.2.1-000007d3]: LS update timer expire
1970/01/01 01:14:08 IMI: NFSM[192.168.2.1-000007d3]: Full (HelloReceived)
1970/01/01 01:14:08 IMI: NFSM[192.168.2.1-000007d3]: nfsm_ignore called
1970/01/01 01:14:08 IMI: NFSM[192.168.2.1-000007d3]: Full (2-WayReceived)
36.11 debug ipv6 ospf nsm
Command:
[no] debug ipv6 ospf nsm [interface|redistribute]
Function:
Open debugging switches showing showing OSPF NSM, the “no debug ipv6 ospf nsm
[interface|redistribute]” command closes this debugging switch.
Default:
Closed.
Command Mode:
Admin mode
36.12 debug ipv6 ospf packet
Command:
[no] debug ipv6 ospf packet [dd | detail | hello | ls-ack | ls-request | ls-update | recv | send]
Function:
Open debugging switches showing OSPF packet messages; the “no debug ipv6 ospf packet [dd |
detail | hello | ls-ack | ls-request | ls-update | recv | send]” command closes this debugging
switch.
Default:
Closed.
Command Mode:
Admin Mode.