Planet SGS-6341-24T4X - Page 612

36-251
Display the OSPF link state data base message.
Parameter:
<tag> is the process tag which is a character string.
<advertiser_router> is the ID of Advertising router, shown in IPv4 address format
Default:
Not displayed
Command Mode:
All modes
Usage Guide:
According to the output messages of this command, we can view the OSPF link state database
messages.
Example:
Use show ipv6 ospf database command will be able to show LSA messages of the OSPF routing protocol
For Example, the displayed messages are:
OSPFv3 Router with ID (192.168.2.2) (Process *null*)
Link-LSA (Interface Vlan1)
Link State ID ADV Router Age Seq# CkSum Prefix
0.0.7.211 192.168.2.2 1409 0x80000001 0x6dda 1
0.0.7.212 192.168.2.3 1357 0x80000001 0x248e 1
Link-LSA (Interface Vlan2)
Link State ID ADV Router Age Seq# CkSum Prefix
0.0.7.211 192.168.2.1 1450 0x80000001 0xa565 1
0.0.7.212 192.168.2.2 1399 0x80000001 0x4305 1
Router-LSA (Area 0.0.0.0)
Link State ID ADV Router Age Seq# CkSum Link
0.0.0.0 192.168.2.1 1390 0x80000006 0x9fe2 1
0.0.0.0 192.168.2.2 1354 0x80000007 0x4af5 2
0.0.0.0 192.168.2.3 1308 0x80000004 0xbbc4 1
Network-LSA (Area 0.0.0.0)
Link State ID ADV Router Age Seq# CkSum
0.0.7.211 192.168.2.1 1390 0x80000001 0x897e
0.0.7.211 192.168.2.2 1354 0x80000001 0x9b69
Intra-Area-Prefix-LSA (Area 0.0.0.0)
Link State ID ADV Router Age Seq# CkSum Prefix Reference
0.0.0.1 192.168.2.1 1389 0x80000005 0x7e2e 1 Router-LSA
0.0.0.2 192.168.2.1 1389 0x80000001 0x22cb 1 Network-LSA
0.0.0.1 192.168.2.3 1306 0x80000002 0xd0d7 1 Router-LSA