Planet SGS-6341-24T4X - Page 618

36-257
36.37 show ipv6 ospf virtual-links
Command:
show ipv6 ospf [<tag>] virtual-links
Function:
Show OSPF virtual link messages.
Parameter:
<tag> is the processes tag, which is a character string.
Default:
Not displayed.
Command Mode:
All modes
Example:
Switch#show ipv6 ospf virtual-links
Virtual Link VLINK1 to router 5.6.7.8 is up
Transit area 0.0.0.1 via interface Vlan1, instance ID 0
Local address 3ffe:1234:1::1/128
Remote address 3ffe:5678:3::1/128
Transmit Delay is 1 sec, State Point-To-Point,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:01
Adjacency state Up
36.38 show ipv6 route process-detail
Command:
show ipv6 route [database] process-detail
Function:
Display the IP routing table with specific process ID or Tag.
Parameters:
The parameter of database means displaying all the routers, no parameter means only displaying
effective routers.
Command Mode:
Admin mode and configure mode.
Example:
Switch#show ipv6 route database process-detail