EasyManuals Logo

Planet SGS-6341-24T4X User Manual

Planet SGS-6341-24T4X
1206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #654 background imageLoading...
Page #654 background image
37-293
Command Mode:
BGP route mode and address-family mode
Usage Guide:
As the negotiation is the default, it can be disabled with this configuration when it is known that the
partner BGP version is old which don’t support capability negotiation.
Example:
Last addition capability negotiation will not be realized in the connection by configuring as follows.
Switch(config-router)#neighbor 10.1.1.64 dont-capability-negotiate
37.54 neighbor ebgp-multihop
Command:
neighbor {<ip-address>|<TAG>} ebgp-multihop [<1-255>]
no neighbor {<ip-address>|<TAG>} ebgp-multihop [<1-255>]
Function:
Configures the EBGP neighbors can existing in different segment as well as its hop count (TTL).
The “no neighbor {<ip-address>|<TAG>} ebgp-multihop [<1-255>]” set that the EBGP neighbors
must be in the same segment.
Parameter:
<ip-address>: Neighbor IP address.
<TAG>: Name of the peer group.
<1-255>: Allowed hop count.
Default:
Must be in the same segment.
Command Mode:
BGP route mode and address-family mode
Usage Guide:
Without this command, EBGP peers are required to be in the same segment and after this
command is configured, peer addresses may from different segments. The allowed hop count can
be configured and will be 255 if not.
Example:
Three device 10.1.1.64(AS100) and 11.1.1.120(AS300) connected respectively to the two interface
10.1.1.66 and 10.1.1.100 of another device. IGP accessibilities of 10.1.1.64 and 11.1.1.120 on both
side routes are ensured through static configuration. The neighbor relationship is established only
after both side are configured as follows:
on 10.1.1.64

Table of Contents

Other manuals for Planet SGS-6341-24T4X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Planet SGS-6341-24T4X and is the answer not in the manual?

Planet SGS-6341-24T4X Specifications

General IconGeneral
Switch typeManaged
Switch layerL3
Quality of Service (QoS) supportYes
Form factor1U
CertificationFCC Part 15 Class A, CE
Product colorBlack
Console portRJ-45
SFP+ module slots quantity4
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity24
Routing entries128
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN featuresStacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN
Copper ethernet cabling technology10BASE-T, 100BASE-T, 1000BASE-T
Flash memory16 MB
Internal memory512 MB
Processor frequency400 MHz
AuthenticationMAC-based authentication, Port-based authentication
Security algorithmsSNMPv3, SSH, SSL/TLS
Throughput95.24 Mpps
Jumbo frames9216
Number of queues8
MAC address table16000 entries
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power supply included-
Power consumption (max)19.9 W
Heat dissipation67.91 BTU/h
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 90 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth240 mm
Width440 mm
Height43.6 mm
Weight3170 g

Related product manuals