Planet SGS-6341-24T4X User Manual

37-304
37.69 neighbor route-reflector-client
Command:
neighbor {<ip-address>|<TAG>} route-reflector-client
no neighbor {<ip-address>|<TAG>} route-reflector-client
Function:
Configure the route reflector client. The “no neighbor {<ip-address>|<TAG>}
route-reflector-client” command cancels this configuration
Parameter:
<ip-address>: Neighbor IP address
<TAG>: Name of peer group
Default:
Not configured.
Command Mode:
BGP route mode and address-family mode
Usage Guide:
The route reflection is used for reducing the peers when the internal IBGP routers inside AS are too
much. The client only exchanges messages with route reflector while the reflector deals with
message exchange among each client and other IBGP, EBGP routers. This command configures
itself as the route reflector, while specific peer group is as its client. Note: this configuration is only
available inside AS.
Example:
Switch(config)#router bgp 100
Switch(config-router)#neighbor 10.1.1.66 remote 100
Switch(config-router)#neighbor 10.1.1.66 route-reflector-client
Switch(config-router)#neighbor 10.1.1.68 remote 100
Switch(config-router)#neighbor 10.1.1.68 route-reflector-client
Switch(config-router)#
Related Command:
bgp client-to-client reflection, no bgp client-to-client reflection, bgp cluster-id
37.70 neighbor route-server-client
Command:
neighbor {<ip-address>|<TAG>} route-server-client
no neighbor {<ip-address>|<TAG>} route-server-client

Planet SGS-6341-24T4X Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Form factor	1U
Certification	FCC Part 15 Class A, CE
Product color	Black
Console port	RJ-45
SFP+ module slots quantity	4
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	24
Routing entries	128
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Stacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Flash memory	16 MB
Internal memory	512 MB
Processor frequency	400 MHz
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	SNMPv3, SSH, SSL/TLS
Throughput	95.24 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power supply included	-
Power consumption (max)	19.9 W
Heat dissipation	67.91 BTU/h
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	240 mm
Width	440 mm
Height	43.6 mm
Weight	3170 g