44-42
Command:
show ip pim neighbor
Function:
Display router neighbors
Command Mode:
Admin Mode and Global Mode
Usage Guide:
Display multicast router neighbors maintained by the PIM
Example:
Switch (config)#show ip pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Priority/Mode
10.1.6.1 Vlan1 00:00:10/00:01:35 v2 1 /
10.1.6.2 Vlan1 00:00:13/00:01:32 v2 1 /
10.1.4.2 Vlan3 00:00:18/00:01:30 v2 1 /
10.1.4.3 Vlan3 00:00:17/00:01:29 v2 1 /
DR Priority/Mode
DR priority in the hello messages from the
neighbor and if the neighbor is the interface’s DP.
44.3.37 show ip pim nexthop
Command:
show ip pim nexthop
Function:
Display the PIM buffered nexthop router in the unicast route table
Command Mode:
Admin Mode and Global Mode
Usage Guide:
Display the PIM buffered nexthop router information.
Example:
Example:
To Next Page
Loading...
