EasyManuals Logo

Planet SGS-6341-24T4X User Manual

Planet SGS-6341-24T4X
1206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #965 background imageLoading...
Page #965 background image
48-2
Enable the debug information of dot1x about errors; the no operation of this command will disable
that debug information.
Command Mode:
Admin Mode.
Usage Guide:
By enabling the debug information of dot1x about errors, users can check the information of errors
that occur in the processes of the Radius protocol operation, which might help diagnose the cause
of faults if there is any.
Example:
Enable the debug information of dot1x about errors.
Switch#debug dot1x error
48.3 debug dot1x fsm
Command:
debug dot1x fsm {all | aksm | asm | basm | ratsm} interface <interface-name>
no debug dot1x fsm {all | aksm | asm | basm | ratsm} interface <interface-name>
Function:
Enable the debug information of dot1x state machine; the no operation of this command will disable
that debug information.
Command Mode:
Admin Mode.
Parameters:
all: Enable the debug information of dot1x state machine;
aksm: Enable the debug information of Authenticator Key Transmit state machine;
asm: Enable the debug information of Authenticator state machine;
basm: Enable the debug information of Backend Authentication state machine;
ratsm: Enable the debug information of Re-Authentication Timer state machine;
<interface-name>: the name of the interface.
Usage Guide:
By enabling the debug information of dot1x, users can check the negotiation process of dot1x
protocol, which might help diagnose the cause of faults if there is any.
Example:
Enable the debug information of dot1x state machine.
Switch#debug dot1x fsm asm interface ethernet1/0/1

Table of Contents

Other manuals for Planet SGS-6341-24T4X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Planet SGS-6341-24T4X and is the answer not in the manual?

Planet SGS-6341-24T4X Specifications

General IconGeneral
Switch typeManaged
Switch layerL3
Quality of Service (QoS) supportYes
Form factor1U
CertificationFCC Part 15 Class A, CE
Product colorBlack
Console portRJ-45
SFP+ module slots quantity4
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity24
Routing entries128
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN featuresStacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN
Copper ethernet cabling technology10BASE-T, 100BASE-T, 1000BASE-T
Flash memory16 MB
Internal memory512 MB
Processor frequency400 MHz
AuthenticationMAC-based authentication, Port-based authentication
Security algorithmsSNMPv3, SSH, SSL/TLS
Throughput95.24 Mpps
Jumbo frames9216
Number of queues8
MAC address table16000 entries
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power supply included-
Power consumption (max)19.9 W
Heat dissipation67.91 BTU/h
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 90 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth240 mm
Width440 mm
Height43.6 mm
Weight3170 g

Related product manuals