Xerox Phaser 6360

Phaser 6300/6350/6360 Color Laser Printer Service Manual A-11
Reference
218 Remove Ribbon From Black Toner Cartridge. The No Toner Sensor indicates the
Ribbon is present on the Black cartridge.
219 The Cyan Toner Cartridge is not a genuine Xerox product. The Toner Cartridge
CRUM indicates the Cyan cartridge is not a Xerox product.
220 The Magenta Toner Cartridge is not a genuine Xerox product. The Toner Cartridge
CRUM indicates the Magenta cartridge is not a Xerox product.
221 The Yellow Toner Cartridge is not a genuine Xerox product. The Toner Cartridge
CRUM indicates the Yellow cartridge is not a Xerox product.
222 The Black Toner Cartridge is not a genuine Xerox product. The Toner Cartridge
CRUM indicates the Black cartridge is not a Xerox product.
223 Metered Toner is not Enabled. Set metered (PagePack) PIN for metered
operation.
224 Replace Cyan Toner Cartridge. The Toner Cartridge CRUM indicates that the Cyan
Cartridge is a metered cartridge for use in metered (PagePack) printers, or is the
wrong Phaser 63XX series configuration type.
225 Replace Magenta Toner Cartridge. The Toner Cartridge CRUM indicates that the
Magenta Cartridge is a metered cartridge for use in metered (PagePack) printers,
or is the wrong Phaser 63XX series configuration type.
226 Replace Yellow Toner Cartridge. The Toner Cartridge CRUM indicates that the
Yellow Cartridge is a metered cartridge for use in metered (PagePack) printers,
or is the wrong Phaser 63XX series configuration type.
227 Replace Black Toner Cartridge. The Toner Cartridge CRUM indicates that the
Black Cartridge is a metered cartridge for use in metered (PagePack) printers, or
is the wrong Phaser 63XX series configuration type.
228 Unknown Error. An error has been reported without specific interpretation by the
software.
229 Replace Cyan Toner Cartridge. The Toner CRUM indicates that the cartridge is the
wrong Phaser Series configuration type.
230 Replace Magenta Toner Cartridge. The Toner CRUM indicates that the cartridge is
the wrong Phaser Series configuration type.
231 Replace Yellow Toner Cartridge. The Toner CRUM indicates that the cartridge is
the wrong Phaser Series configuration type.
232 Replace Black Toner Cartridge. The Toner CRUM indicates that the cartridge is
the wrong Phaser Series configuration type.
233 Replace Non-Phaser 6300/6350/6360 Fuser. The Fuser CRUM indicates that the
installed Fuser is not a 6300/6350/6360 replacement part.
234 Replace Non-Phaser 6300/6350/6360 Imaging Unit. The Imaging Unit CRUM
indicates that the Imaging Unit is not a 6300/6350/6360 replacement part.
Printer Status Codes (Continued)
Code Description