Xerox Phaser 6360 - Page 556

I – 4 Phaser 6300/6350/6360 Color Laser Printer Service Manual
part number, 9-23
Feed Roller Kit
contents
, 9-61
part number, 9-58
Feed Solenoid, 2-41
Feeder Chute
part number
, 9-9
removal, 8-22
fonts
reset defaults
, 6-6
supplied fonts, 1-2
Front Cover
part number
, 9-5
removal, 8-12
Full Stack Sensor, 2-33
actuator removal, 8-55
connector location, 10-5
location, 2-20
output tray full error, 3-7
part number, 9-25
removal, 8-54
testing, A-17
wiring, 10-26
Fuser, 2-36
belt, 2-37
components, 2-37
connector location, 10-6
Drive Assembly, 2-29
part number, 9-21
removal, 8-97
Exit Roller, 2-37
Exit Sensor, 2-37
actuator removal, 8-69
location, 2-20
failure error, 3-7
Fan, 2-36
connector location, 10-5
location, 2-36
part number, 9-23
wiring, 10-19
firmware failure error, 3-7
Heat Roller, 2-37
install or reseat error, 3-7
jam error, 3-6
life count, 1-12
location, 1-10
Lock Lever
part number
, 9-21
removal, 8-70
non-6300 fuser error, 3-6
Non-contact Sensor, 2-37
part number, 9-19
removal, 8-7
replace fuser error, 3-6
temperature
regulation
, 2-15
sensing, 2-18
testing, A-18
view life count, 6-9
wiring diagram, 10-22
Fuser Exit Sensor, 2-37
actuator removal, 8-69
testing, A-17
Fuser Fan, 2-36
connector location, 10-5
failure error, 3-7
removal, 8-67
testing, A-15
wiring, 10-19
Fuser Motor, 2-29
connector location, 10-6
drive train, 2-29
failure error, 3-8
location, 2-32
part number, 9-21
removal, 8-97
wiring, 10-19
G
Gear Kit
contents
, 9-63
installation, 8-59
part number, 9-58
Gear MPT, 2-38
location, 2-33
general status, A-14
guides, 2-39
H
Hard Drive, 1-8
failure error, 3-8
IDE disk error, 4-4
location, 2-45
part number, 9-35
POST testing, 4-3
Hardware Kit
contents
, 9-63
part number, 9-58
Harness Kit
contents
, 9-64
part number, 9-58
Health LED, 4-2
Heat Roller, 2-37
heater lamp, 2-37
help text, 3-2
hidden service menu, 4-8
horizontal color registration, 6-3
Housing Assembly Bias
part number
, 9-27
removal, 8-78
wiring, 10-25
HVPS, 2-45
connectors, 10-7
location, 2-45
part number, 9-35
removal, 8-111
wiring, 10-25