Xerox Phaser 7400 Service Manual

A-8 Phaser 7400 Color Printer Service Manual
F181 Finisher Punch Unit Transfer Motor Failure.
Printer error - Contact service; report fault [nnn]”
Where [nnn] is one of the codes described below.
F141 Finisher Punch Unit counter at end of life. The Punch count exceeds life limit.
F142 Finisher Staple Unit counter at end of life. The Staple count exceeds life limit.
F186 Finisher interface error. Communications lost with Finisher.
I97 Inverter Power Supply Error. +24V is not available to the Inverter.
T3 Fuser belt thermistor short circuit.
T4 Fuser belt thermistor open circuit.
T5 Fuser belt thermistor temperature too high.
T6 Fuser belt thermistor temperature too low.
T7 Fuser Exit Sensor errror.
T8 Fuser belt slack error.
U60 Job Offset Home Position error. Job Offset Assembly does not reach home position.
U61 Control Panel communications failure. Engine Control Board can not communicate with
the Control Panel.
135 No data to the Yellow LED Head.
136 No data to the Magenta LED Head.
137 No data to the Cyan LED Head.
138 No data to the Black LED Head.
188 Motor Driver Board Option tray communications error.
221 Tray 3 Firmware Error. Firmware error in Tray 3 Flash Memory.
222 Tray 4 Firmware Error. Firmware error in Tray 4 Flash Memory.
223 Tray 5 Firmware Error. Firmware error in Tray 5 Flash Memory.
224 Tray 6 Firmware Error. Firmware error in Tray 6 Flash Memory.
225 Duplex Unit Firmware Error. Firmware error in Duplex Unit Flash Memory.
226 Motor Driver Board Firmware Error. Firmware error in Inverter Flash Memory.
227 Finisher Inverter Firmware Error. Firmware error in Inverter Flash Memory.
231 CRUM Reader interface Failure. A communication error has occurred between the
Engine Logic Board and CRUM Reader Board.
232 CRUM Reader interface Failure. An error has occurred in the CRUM Reader Board
transmit circuitry.
Printer Status Codes (Continued)
Code Description

Xerox Phaser 7400 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	600 x 1200 DPI
Time to first page (black, normal)	12 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Print speed (color, normal quality, A4/US Letter)	36 ppm
Storage media	HDD
Internal memory	512 MB
Processor model	PowerPC
Maximum internal memory	1 MB
Internal storage capacity	20 GB
Total input capacity	800 sheets
Maximum input capacity	3000 sheets
Paper tray 2 input capacity	350 sheets
Auto document feeder (ADF) input capacity	1650 sheets
Maximum print size	297 x 420 mm
Paper tray media types	Envelopes, Labels, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Statement (140 x 216mm), Legal (media size)
Maximum ISO A-series paper size	A3
Power requirements	100-240V, 50/60Hz
Networking features	Fast Ethernet
Supported media weight(s)	270 g/m²
Maximum operating temperature range (T-T)	10 - 32 °C
Certification	FCC p.15 A, CE
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-4 - 140 °F
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Maximum duty cycle	150000 pages per month

Weight and Dimensions

Dimensions (WxDxH)	1438 x 623 x 975 mm