Agilent Technologies E5071C - Page 2530

Programming
2757
SCPI.SYSTem.UPReset
Object type
Method (Write-only)
Syntax
SCPI.SYSTem.UPReset
Description
This command presets the E5071C with the user settings. The command is
executed regardless of the operation mode in preset state.
• If you try to specify a file for a preset (D:\UserPreset.sta) that
does not exist, a warning message will be displayed and
SCPI.SYSTem.PRESet will be executed.
Examples
CPI.SYSTem.UPReset
Related objects
SCPI.IEEE4882.RST
SCPI.SYSTem.PRESet
Equivalent key
Preset > OK
Equivalent SCPI command
Syntax
:SYSTem:UPReset
Example of use
10 OUTPUT 717;":SYST:UPR"