Agilent Technologies E5071C - Page 2559

E5071C
2786
:CALCulate:ATRaces:MARKer:COUPle
Type
Command/Query
Syntax
:CALCulate:ATRaces:MARKer:COUPle {ON|OFF|1|0}
:CALCulate:ATRaces:MARKer:COUPle?
Description
This command sets state for the marker couple mode.
Parameter
Description State of marker coupling
Data Type Boolean type (Boolean)
Range ON|OFF|1|0
Preset Value ON
Unit -
Resolution -
Query Response
{1|0}<newline><^END>
Examples
10 OUTPUT 717;":CALC:ATR:MARK:COUP ON"
20 OUTPUT 717;":CALC:ATR:MARK:COUP?"
30 ENTER 717;A
Related Commands
:CALCulate:ATRaces:TIME:COUPle
Equivalent GUI
TDR/TDT > Trace Control > Marker (Under Coupling)