Agilent Technologies E5071C - Page 2560

Programming
2787
:CALCulate:ATRaces:TIME:COUPle
Type
Command/Query
Syntax
:CALCulate:ATRaces:TIME:COUPle {ON|OFF|1|0}
:CALCulate:ATRaces:TIME:COUPle?
Description
This command sets state for the transform couple mode.
Parameter
Description State of the time coupling.
Data Type Boolean type (Boolean)
Range ON|OFF|1|0
Preset Value ON
Unit -
Resolution -
Query Response
{1|0}<newline><^END>
Examples
10 OUTPUT 717;":CALC:ATR:TIME:COUP ON"
20 OUTPUT 717;":CALC:ATR:TIME:COUP?"
30 ENTER 717;A
Related Commands
:CALCulate:ATRaces:MARKer:COUPle
Equivalent Key
TDR/TDT > Trace Control > Time (Under Coupling)