Agilent Technologies E5071C - Page 2580

Programming
2807
:CALCulate:TRACe{Tr}:CONVersion:PEELing:STATe
Type
Command/Query
Syntax
:CALCulate:TRACe{Tr}:CONVersion:PEELing:STATe {ON|OFF|1|0}
:CALCulate:TRACe{Tr}:CONVersion:PEELing:STATe?
Description
This command sets state for the peeling function.
Parameter
Description Peeling function on/off.
Data Type Boolean type (Boolean)
Range ON|OFF|1|0
Preset Value OFF
Unit -
Resolution -
Query Response
{1|0}<newline><^END>
Examples
10 OUTPUT 717;":CALC:TRAC1:CONV:PEEL:STAT ON"
20 OUTPUT 717;":CALC:TRAC1:CONV:PEEL:STAT?"
30 ENTER 717;A
Equivalent GUI
TDR/TDT > Parameters > Peeling