Agilent Technologies E5071C - Page 2594

Programming
2821
:CALCulate:TRACe{Tr}:MARKer{Mk}:FUNCtion:TRACking
Type
Command/Query
Syntax
:CALCulate:TRACe{Tr}:MARKer{Mk}:FUNCtion:TRACking {ON|OFF|1|0}
:CALCulate:TRACe{Tr}:MARKer{Mk}:FUNCtion:TRACking?
Description
This command sets state for the marker tracking mode. Using this
command makes the marker constantly pointing to the point whereby the
marker is either set to Max or Min and is not able to move to other desire
point.
Parameter
Description Status for the marker tracking mode
Data Type Boolean type (Boolean)
Range ON|OFF|1|0
Preset Value OFF
Unit -
Resolution -
Query Response
{1|0}<newline><^END>
Examples
10 OUTPUT 717;":CALC:TRAC1:MARK1:FUNC:TYPE MAX"
20 OUTPUT 717;":CALC:TRAC1:MARK1:FUNC:TRAC ON"
30 OUTPUT 717;":CALC:TRAC1:MARK1:FUNC:TRAC?
40 ENTER 717;A
Related Commands
:CALCulate:TRACe{Tr}:MARKer{Mk}:FUNCtion:EXECute
:CALCulate:TRACe{Tr}:MARKer{Mk}:FUNCtion:TYPE
Equivalent GUI
Marker Search > Max or Min
(:CALCulate:TRACe{Tr}:MARKer{Mk}:FUNCtion:TYPE is used together
when equivalent GUI is clicked)