Agilent Technologies E5071C - Page 2593

E5071C
2820
:CALCulate:TRACe{Tr}:MARKer{Mk}:FUNCtion:EXECute
Type
Command Only
Syntax
:CALCulate:TRACe{Tr}:MARKer{Mk}:FUNCtion:EXECute
Description
This command executes marker Max or Min for a selected marker function.
This is different than tracking mode because moving the marker to another
point, the marker does not point back to Max or Min that is previously set.
Examples
10 OUTPUT 717;":CALC:TRAC1:MARK1:FUNC:TYPE MAX"
10 OUTPUT 717;":CALC:TRAC1:MARK1:FUNC:EXEC"
Related Commands
:CALCulate:TRACe{Tr}:MARKer{Mk}:FUNCtion:TRACking
:CALCulate:TRACe{Tr}:MARKer{Mk}:FUNCtion:TYPE
Equivalent GUI
No equivalent GUI is available.