Agilent Technologies E5071C - Page 2598

Programming
2825
:CALCulate:TRACe{Tr}:MARKer{Mk}:STATe
Type
Command/Query
Syntax
:CALCulate:TRACe{Tr}:MARKer{Mk}:STATe {ON|OFF|1|0}
:CALCulate:TRACe{Tr}:MARKer{Mk}:STATe?
Description
This command sets state for the marker display.
Parameter
Description Status for the marker display
Data Type Boolean type (Boolean)
Range ON|OFF|1|0
Preset Value OFF
Unit -
Resolution -
Query Response
{1|0}<newline><^END>
Examples
10 OUTPUT 717;":CALC:TRAC1:MARK1:STAT ON"
20 OUTPUT 717;":CALC:TRAC1:MARK1:STAT?"
30 ENTER 717;A
Related Commands
:CALCulate:TRACe{Tr}:MARKer{Mk}:REFerence:STATe
Equivalent GUI
Marker OR
Setup > Advanced Mode > Marker