Agilent Technologies E5071C - Page 2599

E5071C
2826
:CALCulate:TRACe{Tr}:MARKer{Mk}:X
Type
Command/Query
Syntax
:CALCulate:TRACe{Tr}:MARKer{Mk}:X <numeric>
:CALCulate:TRACe{Tr}:MARKer{Mk}:X?
Description
This command sets stimulus value of the marker.
Parameter
Description Marker stimulus value (X-Axis)
Data Type Double precision floating point type (Double)
Range -
Preset Value -10n
Unit -
Resolution -
Query Response
{numeric}<newline><^END>
Examples
10 OUTPUT 717;":CALC:TRAC1:MARK1:X 50"
20 OUTPUT 717;":CALC:TRAC1:MARK1:X?"
30 ENTER 717;A
Related Commands
:CALCulate:TRACe{Tr}:MARKer{Mk}:Y
Equivalent GUI
Setup > Advanced Mode > Marker > Select Marker (Entry box above the
graph plot)