Product Information
757
168 data not
allowed
position where this instrument does not accept
one.
C
No. Message Description
240
Calibration
data lost
This error occurs when a file containing the
system calibration data is not found or in a
damaged state at time of the startup of this
instrument, indicating a failure of this instrument.
Contact an Agilent Technology sales office or the
company from which you bought the instrument.
22
Calibration
method
not
selected
This error occurs when the command for
validating the calibration data,
SENS:CORR:COLL:SAVE or
SENS:CORR:OFFS:COLL:SAVE is executed before
the command for selecting a calibration type,
SENS:CORR:COLL:METH:xxxx or
SENS:CORR:OFFS:COLL:METH:xxxx, is executed.
This error is not generated by front key
operations.
-
148
Character
data not
allowed
A character data element (not violating the
standard) has been received at a position where
this instrument does not accept one. Double
quotes (") are omitted where it is necessary to
place a parameter in double quotes ("), for
example.
-
100
Command
error
A comprehensive syntax error has occurred
showing that this instrument cannot detect a
more detailed error. This code simply shows that
a command error defined in 11.5.1.1.4,
IEEE488.2 has occurred.
60
Continuous
switching
may
damage
source
attenuator
This error occurs when different power ranges are
selected in multiple channel measurement
settings to avoid source attenuator damage.
• This error occurs in case of options
2D5, 4D5, 2K5 and 4K5.
D
To Next Page
Loading...
Need help?
General
