E5071C
862
• Perform Cal: Calibration data is acquired from the actual
Calibration measurement.
• Load Cal from: Calibration data is recalled from the State file.
The State file should include the full 2 port calibration for the
corresponding ports.
The radio button for unselected options are disabled.
In 2 ports E5071C model, the option and entry for Port 3 & 4 is not
displayed.
4. Set Up Instrument State and Exit: If this check box is checked, only set
up is performed and the program is terminated thereafter without
executing the verification process. If this check box is un-checked,
the verification process is executed once the set up is performed.
Overview
1. This tab displays the overview of the ENA System Verification. Click
Meas. Details to view the Verification measurement details. Click
Meas. Overview to toggle back to ENA System Verification overview.
To Next Page
Loading...
Need help?
General
