Programming
1121
event register is set to "1."
10
Limit Test Fail
(Questionable limit
status register summary)
Set to "1" while one of the
enabled bits in the
questionable limit status event
register is set to "1."
11 - 15 Not used Always 0
Status Bit Definitions of the Questionable Status Event Register
Bit
Position
Name Description
0 - 7 Not used Always 0
8
Bandwidth
Test Fail
(Questionable
bandwidth
limit status
register
summary)
Set to "1" when a transition of the
condition register occurs if the transition
filters are set as valid values.
9
Ripple Test
Fail
(Questionable
ripple limit
status
register
summary)
Set to "1" when a transition of the
condition register occurs if the transition
filters are set as valid values.
10
Limit Test
Fail
(Questionable
limit status
register
summary)
Set to "1" when a transition of the
condition register occurs if the transition
filters are set as valid values.
11
VBA Macro
Interrupted
Set to "1" when a VBA macro is
interrupted by one of the following
reasons.
Occurrence of an execution error
Executing "End" statement in the VBA
To Next Page
Loading...
