Agilent Technologies E5071C

E5071C
1136
trace 6.
7
Trace 7 Bandwidth Test
Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the
bandwidth test result for
trace 7.
8
Trace 8 Bandwidth Test
Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the
bandwidth test result for
trace 8.
9
Trace 9 Bandwidth Test
Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the
bandwidth test result for
trace 9.
10
Trace 10 Bandwidth Test
Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the
bandwidth test result for
trace 10.
11
Trace 11 Bandwidth Test
Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the
bandwidth test result for
trace 11.
12
Trace 12 Bandwidth Test
Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the