Agilent Technologies E5071C

Programming
1165
Stop1(2) = "2E9" ' Segm.2: 2 GHz
Stop1(3) = "2.2E9" ' Segm.3: 2.2 GHz
Cent2 = 1900000000# ' Center Frequency Ch.2 : 1.9 GHz
Span2 = 500000000# ' Span Ch.2 : 500 MHz
Nop1(1) = 21 ' Number of points Segm.1: 21
Nop1(2) = 101 ' Segm.2: 101
Nop1(3) = 21 ' Segm.3: 21
Nop2 = 101 ' Ch.2 : 101
IfBw1(1) = 50000# ' IFBW Ch.1 Segm.1: 50 kHz
IfBw1(2) = 10000# ' Segm.2: 10 kHz
IfBw1(3) = 50000# ' Segm.3: 50 kHz
IfBw2 = 70000# ' Ch.2 : 70 kHz
Power1(1) = 0 ' Power Ch.1 Segm.1: 0 dBm
Power1(2) = -10 ' Segm.2: -10 dBm
Power1(3) = 0 ' Segm.3: 0 dBm
Power2 = 0 ' Ch.2 : 0 dBm
NumOfTr1 = 4 ' Number of Trace Ch.1 : 4
NumOfTr2 = 2 ' Ch.2 : 2
Allocate1 = "D12_34" ' Allocate Traces Ch.1 : D12_34
Allocate2 = "D12" ' Ch.2 : D12
Para1(1) = "S11" ' Measurement Ch.1 Trace1: S11
Para1(2) = "S21" ' Parameter Trace2: S21
Para1(3) = "S12" ' Trace3: S12
Para1(4) = "S22" ' Trace4: S22
Para2(1) = "S31" ' Ch.2 Trace1: S31
Para2(2) = "S33" ' Trace2: S33
Fmt1(1) = "SLIN" ' Data Format Ch.1 Trace1: Smith(Lin/Phase)
Fmt1(2) = "MLOG" ' Trace2: Log Mag
Fmt1(3) = "MLOG" ' Trace3: Log Mag
Fmt1(4) = "SLIN" ' Trace4: Smith(Lin/Phase)
Fmt2(1) = "MLOG" ' Ch.2 Trace1: Log Mag
Fmt2(2) = "SLIN" ' Trace2: Smith(Lin/Phase)
RefPos1(1) = 9 ' Reference Ch.1 Trace2: 9
RefPos1(2) = 9 ' Position Trace3: 9
RefPos2(1) = 9 ' Ch.2 Trace1: 9
RefLev1(1) = 0 ' Reference Level Ch.1 Trace2: 0 dBm
RefLev1(2) = 0 ' Trace3: 0 dBm