Cisco Catalyst 4500 Series - Page 1216

Index
IN-8
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
displaying SEEPROM information 2-701
generic-error-message, setting for the switch 2-556
Gigabit Ethernet interface
clearing the hardware logic 2-102
Gigabit Ethernet uplink
selecting 2-278
showing the mode 2-699, 2-700
global configuration mode
using 1-5
H
hardware module
resetting a module by toggling the power 2-274
hardware statistics
disabling 2-267
enabling 2-267
hardware uplink
selecting the mode 2-278
showing the mode 2-699, 2-700
helper addresses, IP 2-758
hot standby protocol
debugging 2-143
disabling debugging 2-143
limiting output 2-143
hw-module beacon command 2-268
hw-module module start command 2-269
hw-module module stop command 2-271
hw-module uplink mode command 2-276
I
identifier-string, setting for the switch 2-556
ID mapping, creating an ANCP client 2-16
IDPROMs
displaying SEEPROM information
chassis 2-701
clock module 2-701
fan trays 2-701
module 2-701
mux buffer 2-701
power supplies 2-701
supervisor engine 2-701
ifIndex persistence
compress SNMP ifIndex table format 2-978
disabling globally 2-977
disabling on an interface 2-973
enabling globally 2-977
IGMP
applying filters for host joining on Layer 2
interfaces
2-324
clearing IGMP group cache entries 2-111
configuring frequency for IGMP host-query
messages
2-327
creating an IGMP profile 2-326
displaying IGMP interface configuration
information
2-745
displaying profiles 2-747
setting maximum group numbers 2-325
IGMP profiles
displaying 2-747
IGMP snooping
clearing the EHT database 2-113
configuring a Layer 2 interface as a group
member
2-340
configuring a Layer 2 interface as a multicast
router
2-338
configuring a static VLAN interface 2-340
displaying multicast information 2-754
displaying VLAN information 2-748, 2-752, 2-755
enabling 2-329
enabling immediate-leave processing 2-336
enabling on a VLAN 2-333
enabling per-VLAN Explicit Host Tracking 2-334
informs
enabling 2-975
inline power
displaying inline power status 2-891