2-550
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
power redundancy-mode
Table 2-17 illustrates how the 9000 W AC power supply is evaluated in redundant mode.
Table 2-18 illustrates how the 9000 W AC power supply is evaluated in combined mode.
Both sides at 110 V+110 V 3090 3360
Both sides at 220 V 4000 4360
220 V+220 V, other side 220 V 4000 6600
Both sides at 220 V+220 V 4000 8700
Table 2-16 Combined Mode Output for the 6000 W AC Power Supply
Power Supply Chassis Power Inline Power
Table 2-17 Power Output in Redundant Mode for the 9000 W AC Power Supply
Power Supply 12V (data) (W) -50V (PoE) (W)
1
Total Power (W)
1. Power supply output drawings should not exceed the total power.
110VAC 960 1000 1100
110VAC + 110 VAC 1460 2000 2200
110VAC + 110 V AC+ 110VAC 1460 2500 3300
220VAC 1460 2500 3000
220VAC + 220VAC 1960 5000 6000
220VAC + 220VAC + 220VAC 1960 7500 9000
Table 2-18 Power Output in Combined Mode for the 9000 W AC Power Supply
Power Supply 12V (data) (W) -50V (PoE) (W)
1
Total Power
(W)
Both sides at 110 VAC 1594 1420 1790
Both sides at 110VAC + 110VAC 2627 3320 3610
Both sides at 110VAC + 110VAC +
110VAC
2627 4150 5420
One side at 110VAC + 110VAC +
110VAC, the other at 110VAC +
110VAC
2019 3458 4520
One side at 110VAC + 110VAC +
110VAC, the other at 110VAC
1615 2367 3620
One side at 110VAC + 110VAC, the
other at 110VAC
1615 2130 2710
Both sides at 220VAC 2828 4150 4930
Both sides at 220VAC + 220VAC 3762 8300 10140
Both sides at 220VAC + 220VAC +
220VAC
3762 14400 17210
To Next Page
Loading...
