Cisco Catalyst 4500 Series - Page 682

2-624
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
set cos
set dscp Marks a packet by setting the differentiated services code
point (DSCP) value in the type of service (ToS) byte.
set precedence Sets the precedence value in the packet header.
show policy-map Displays information about the policy map.
Command Description