2-775
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show ip wccp
show ip wccp service-number detail
The following example displays WCCP client information and WCCP router statistics that include the
type of services:
Switch# show ip wccp 91 detail
WCCP Client information:
WCCP Client ID: 10.10.10.2
Protocol Version: 2.0
State: Usable
Redirection: L2
Packet Return: GRE
Packets Redirected: 0
Connect Time: 00:05:23
Assignment: MASK
Mask SrcAddr DstAddr SrcPort DstPort
---- ------- ------- ------- -------
0000: 0x00000000 0x00000001 0x0000 0x0000
Value SrcAddr DstAddr SrcPort DstPort CE-IP
----- ------- ------- ------- ------- -----
0000: 0x00000000 0x00000000 0x0000 0x0000 0x0A0A0A02 (10.10.10.2)
0001: 0x00000000 0x00000001 0x0000 0x0000 0x0A0A0A02 (10.10.10.2)
show ip wccp interfaces
The following is sample output from the show ip wccp interfaces command:
Switch# show ip wccp interfaces
WCCP interface configuration:
FastEthernet10/4
Output services: 2
Input services: 3
Mcast services: 1
Exclude In: FALSE
Table 32 describes the significant fields shown in the display.
show ip wccp web-cache
The following is sample output from the show ip wccp web-cache command:
Switch# show ip wccp web-cache
Global WCCP information:
Router information:
Table 32 show ip wccp interfaces Field Descriptions
Field Description
Output services Indicates the number of output services configured on the
interface.
Input services Indicates the number of input services configured on the
interface.
Mcast services Indicates the number of multicast services configured on the
interface.
Exclude In Displays whether traffic on the interface is excluded from
redirection.