EZ-USB FX3 Technical Reference Manual, Document Number: 001-76074 Rev. *F 478
LNK_ERROR_CONF
0xE003300C
10.15.4 LNK_ERROR_CONF (continued)
11 HDR_ADV_LGO_EN Header Sequence Number Advertisement LGO_Ux Received Error Count Enable
LGO_Ux Link Command received during Header Sequence Number Advertisement
[USB 3.0: §7.3.6, p 7−30]
10 HDR_ADV_LCRD_EN Header Sequence Number Advertisement LCRD_x Received Error Count Enable
LCRD_x Link Command received during Header Sequence Number Advertisement
[USB 3.0: §7.3.6, p 7−30]
9 HDR_ADV_HP_EN Header Sequence Number Advertisement HP Received Error Count Enable
Header Packet received during Header Sequence Number Advertisement
[USB 3.0: §7.3.6, p 7−30]
8 HDR_ADV_TIMEOUT_EN Header Sequence Number Advertisement PENDING_HP_TIMER Timeout Count Enable
PENDING_HP_TIMER timeout before receipt of Header Sequence Number LGOOD_n Link
Command
[USB 3.0: §7.3.6, p 7−30]
7 TX_SEQ_NUM_ERR_EN ACK Tx Header Sequence Number Error Count Enable
Received LGOOD_n does not match ACK Tx Header Sequence Number.
[USB 3.0: §7.3.5, p 7−30]
6PM_LC_TIMEOUT_EN PM_LC_TIMER Timeout Count Enable
This indicates that an LGO_Ux, LAU, or LXU Link Command is missed.
[USB 3.0: §7.3.4, p 7−29]
5 CREDIT_HP_TIMEOUT_EN CREDIT_HP_TIMER Timeout Count Enable
Remote Rx Header Buffer Credit has not been received by CREDIT_HP_TIMEOUT.
[USB 3.0: §7.2.4.1.10, p 7−21…7−22]
4 MISSING_LCRD_EN Missing LCRD_x Detection Count Enable
LCRD_x Sequence does not match what is expected.
[USB 3.0: §7.3.4, p 7−29]
3 MISSING_LGOOD_EN Missing LGOOD_n Detection Count Enable
LGOOD_n Sequence Number does not match what is expected.
[USB 3.0: §7.3.4, p 7−29]
2 RX_HP_FAIL_EN Receive Header Packet Fail Count Enable
Link Layer Block has failed to receive a Header Packet for three consecutive times. Failures
are CRC errors or spurious K-symbols.
[USB 3.0: §7.3.3.2, p 7−28]
1 RX_SEQ_NUM_ERR_EN Rx Header Sequence Number Error Count Enable
Received Rx Header Sequence Number does not match what is expected.
[USB 3.0: §7.3.3.3, p 7−28]
0 HP_TIMEOUT_EN PENDING_HP_TIMER Timeout Count Enable
Header Packet acknowledgement has not been received by PENDING_HP_TIMEOUT.
[USB 3.0: §7.2.4.1.10, p 7−21]
To Next Page
Loading...
