120 Upgrade and Maintenance Manual
RX100 S7
Power supply
6.3 Redundant power supply
In its basic configuration, the server has one power supply module that adjusts
automatically to any mains voltage in the range of 100 VAC to 240 VAC. Besides
the power supply module, a second power supply module can be installed
optionally to serve as a redundant power supply. If one power supply module
fails, the second power supply module in the redundant configuration ensures
operation can continue uninterrupted. The failed power supply module can be
exchanged without shutting down the server.
6.3.1 Installing the second power supply module
V CAUTION!
Follow the safety instructions in chapter "Important information" on
page 43.
6.3.1.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Main steps: tool-less
6.3.1.2 Preliminary steps
Ê Perform the following procedures:
1. "Opening the rack door" on page 59
Customer Replaceable Units (CRU)
Average task duration: 5 minutes
To Next Page
Loading...
