Fujitsu PRIMERGY RX100 S7 - Preliminary Steps; Replacing the CSS Cable for the LSP; Required Tools

412 Upgrade and Maintenance Manual RX100 S7
Cables
16.8 Replacing the CSS cable for the LSP
V CAUTION!
Follow the safety instructions in chapter "Important information" on
page 43.
16.8.1 Required tools
● Preliminary and concluding steps: tool-less
● Main steps: tool-less
16.8.2 Preliminary steps
Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Locating the defective server" on page 55
3. "Shutting down the server" on page 59
4. "Extending/removing the server from the rack" on page 60
5. "Opening the server" on page 64
Field Replaceable Units (FRU)
Average task duration: 5 minutes