Fujitsu PRIMERGY RX100 S7 - Inch HDD Subsystem; Equipping the 3.5-Inch HDD Bays

RX100 S7 Upgrade and Maintenance Manual 159
Hard disk drives / solid state drives
7.2 3.5-inch HDD subsystem
7.2.1 Equipping the 3.5-inch HDD bays
Figure 75: Equipping the 3.5-inch HDD bays
– If only one HDD module is installed, the HDD module will be installed in the
left bay (seen from the front) and a dummy module must be installed in the
right bay.
– Installing different capacities, install the biggest capacity first.
– Installing different rotating speed, install the fastest rotating speed first.
SAS connectivity
HDD naming scheme
Controller Channel Connection
SAS controller
in slot 1
1 Drive 1, 2
3.5-inch HDDs
Bay
RAID
Manager
#
Channel
log.
Drive #
Bay
RAID
Manager
#
Channel
log.
Drive #
1 [0] 102[1] 20
Table 6: HDD naming scheme
/
0