EasyManua.ls Logo

Fujitsu PRIMERGY RX100 S7 - SFP+ Transceiver Modules; Installing SFP+ Transceiver Modules; Removing the Protective Optical Port Plug; Required Tools

Fujitsu PRIMERGY RX100 S7
490 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RX100 S7
Upgrade and Maintenance Manual 191
Expansion cards and backup units
9.3 SFP+ transceiver modules
For Fiber Channel over Ethernet (FCoE) configurations, the ethernet server
adapter is equipped with one or two SFP+ (small form-factor pluggable)
transceiver modules.
9.3.1 Installing SFP+ transceiver modules
V CAUTION!
Follow the safety instructions in chapter "Important information" on
page 43.
9.3.1.1 Required tools
Tool-less
9.3.1.2 Removing the protective optical port plug
Figure 102: Removing the protective optical port plug
Ê Remove the SFP+ transceiver module from its protective packaging.
Upgrade and Repair Units (URU)
Average task duration: 5 minutes

Table of Contents

Other manuals for Fujitsu PRIMERGY RX100 S7

Related product manuals