Fujitsu PRIMERGY RX100 S7 - Connecting the Front LAN Cable to the New Front LAN Card; Disconnecting the Front LAN Cable from the Front LAN Card; Installing the New Front LAN Card; Installing the Riser Module 1

344 Upgrade and Maintenance Manual RX100 S7
Management and diagnostics modules
14.3.4.5 Disconnecting the front LAN cable from the front LAN card
Ê Disconnect the front LAN cable from the front LAN card as described in
section "Disconnecting the front LAN cable from the front LAN card" on
page 337.
14.3.4.6 Connecting the front LAN cable to the new front LAN card
I The front LAN card is already mounted in its holder.
Figure 234: Connecting the front LAN cable to the front LAN card
Ê Connect the front LAN cable to the front LAN card.
14.3.4.7 Installing the new front LAN card
Ê Install the front LAN card as described in section "Installing the front LAN
card" on page 332.
14.3.4.8 Installing the riser module 1
Ê Install the riser module 1 as described in section "Installing the front LAN
card" on page 332.