Fujitsu PRIMERGY RX100 S7 - Installing the TPM

RX100 S7 Upgrade and Maintenance Manual 365
System board and components
15.3.1.5 Installing the TPM
Figure 251: TPM bit insert
Ê Attach the TPM bit insert or TPM module fixing tool (Japanese market) to a
bit screw driver.
Figure 252: Installing the TPM
Ê Connect the TPM to the system board (1).
Ê Fasten the TPM with the special screw for the TPM using the TPM bit insert
or TPM module fixing tool (Japanese market) (2).
V CAUTION!
Do not fasten the screw too firmly. Stop it by extent where the head
of the screw lightly touches the TPM (torque value of 0.6 Nm).
/
0