Fujitsu PRIMERGY RX100 S7 - Removing the Defective Fan Module; Preliminary Steps

RX100 S7 Upgrade and Maintenance Manual 175
Fans
8.2.2 Preliminary steps
Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Locating the defective server" on page 55
3. "Shutting down the server" on page 59
4. "Extending/removing the server from the rack" on page 60
5. "Opening the server" on page 64
6. "Locating the defective component" on page 58
8.2.3 Removing the defective fan module
Figure 86: Disconnecting the fan cable
Ê Disconnect the fan cable of the fan module from the fan/ODD power cable.