Fujitsu PRIMERGY RX100 S7 - Installing the New BBU in the BBU Holder

RX100 S7 Upgrade and Maintenance Manual 261
Expansion cards and backup units
9.5.5.7 Installing the new BBU in the BBU holder
I There are different BBUs available. Please notice the position of the
three bolts (see circles in figure 147and figure 148) to recognise the right
position for installing the BBU in the BBU holder.
Figure 171: Installing the BBU in the BBU holder
Ê At a slight angle, fit the BBU under the right retaining bracket on the BBU
holder (1).
Ê Fold down the BBU until it locks in place (2).