Fujitsu PRIMERGY RX100 S7 - Removing the Expansion Card; Removing the Riser Module 2

RX100 S7 Upgrade and Maintenance Manual 213
Expansion cards and backup units
9.4.4.3 Removing the riser module 2
Figure 126: Removing the riser module 2
Ê Remove the cables from the expansion card.
Ê Carefully pull out the riser module 2 upward.
9.4.4.4 Removing the expansion card
Figure 127: Removing the expansion card- slot 2
Ê Pull out the expansion card from the riser card slot.