RX100 S7
Upgrade and Maintenance Manual 409
Cables
16.6.5 Concluding steps
Ê Perform the following procedures:
1. "Closing the server" on page 66
2. "Installing the server in the rack" on page 68
3. "Switching on the server" on page 72
4. "Closing the rack door" on page 73
16.7 Replacing the SATA cables for the
backplane
V CAUTION!
Follow the safety instructions in chapter "Important information" on
page 43.
16.7.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Main steps: tool-less
16.7.2 Preliminary steps
Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Locating the defective server" on page 55
3. "Shutting down the server" on page 59
4. "Extending/removing the server from the rack" on page 60
Field Replaceable Units (FRU)
Average task duration: 5 minutes
To Next Page
Loading...
