Fujitsu PRIMERGY RX100 S7 - Connecting the BBU Cable to the New BBU; Disconnecting the BBU Cable from the Defective BBU

260 Upgrade and Maintenance Manual RX100 S7
Expansion cards and backup units
9.5.5.5 Disconnecting the BBU cable from the defective BBU
Figure 169: Disconnecting the BBU cable from the BBU
Ê Disconnect the BBU cable from the BBU.
9.5.5.6 Connecting the BBU cable to the new BBU
Figure 170: Connecting the BBU cable
Ê Connect the BBU cable to the BBU.
V CAUTION!
Make sure that the connector side with the three dots is on the top (see
close-up). Otherwise you risk short-circuits.