Fujitsu PRIMERGY RX100 S7 - Concluding Steps; Installing the Riser Module 1

RX100 S7 Upgrade and Maintenance Manual 295
Processo
r
11.3.10 Installing the riser module 1
Ê Install the riser module 1 as described in section "Installing the riser module
1" on page 292.
11.3.11 Concluding steps
Ê Perform the following procedures:
1. "Closing the server" on page 66
2. "Installing the server in the rack" on page 68
3. "Switching on the server" on page 72
4. "Closing the rack door" on page 73