58 Upgrade and Maintenance Manual
RX100 S7
Basic hardware procedures
4.1.3 Locating the defective component
After determining the error class by the CSS or Global Error indicators local
diagnostic indicators on the system board, HDD modules and power supply
modules allow you to identify the defective component (see section
"Connectors and indicators" on page 447).
I For further information, refer to the "ServerView Suite Local Service
Concept (LSC)" manual available from the ServerView Suite DVD 2
supplied with your PRIMERGY server or online at
http://manuals.ts.fujitsu.com (EMEA market) or
http://jp.fujitsu.com/platform/server/primergy/manual/ (Japanese market).
I Your server can be equipped with a ServerView Local Service Panel
(LSP) in the slim bay.
The ServerView Local Service Panel enables you to check the status of
the key system components at any time without opening the housing. For
information on the functions provided by the ServerView Local Service
Panel see the associated documentation.
4.1.3.1 Local diagnostic indicators on the system board
Using the Indicate CSS button
Ê Shut down and power off the server.
Ê Disconnect the AC power cord(s) from the system.
I It is mandatory to disconnect power cords in order to use the Indicate
CSS functionality.
Ê Press the Indicate CSS button to highlight defective components (see
section "Connectors and indicators" on page 447).
I In addition to local diagnostic indicators, CSS or Global Error LEDs
indicate, if the defective component is a customer replaceable unit or if a
service technician needs to be dispatched to replace the part (see
section "Determining the error class" on page 56).
If the system has been powered off to replace a non hot-plug unit, a
system of PRIMERGY diagnostics indicators guides you to the faulty
component.
To Next Page
Loading...
