Fujitsu PRIMERGY RX100 S7 - Removing the Defective LSP; Disconnecting the CSS Cable; Installing the New LSP

326 Upgrade and Maintenance Manual RX100 S7
Management and diagnostics modules
14.2.3.3 Disconnecting the CSS cable
Ê Disconnect the CSS cable as described in section "Disconnecting the CSS
cable" on page 323.
14.2.3.4 Removing the defective LSP
Ê Remove the LSP as described in section "Removing the LSP" on page 324.
14.2.3.5 Installing the new LSP
Ê Install the LSP as described in section "Installing the LSP" on page 319.
14.2.3.6 Connecting the CSS cable
Figure 218: Connecting the CSS cable to the LSP
Ê Connect the CSS cable as described in section "Connecting the CSS cable"
on page 320.