EasyManua.ls Logo

Fujitsu PRIMERGY RX100 S7 - Network Adapter D2735

Fujitsu PRIMERGY RX100 S7
490 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RX100 S7
Upgrade and Maintenance Manual 185
Expansion cards and backup units
9.2.1.3 Network adapter D2735
Figure 93: Placing the slot bracket - D2735
Ê Place the controller on the mounting tabs on the slot bracket (1).
Ê Carefully shift the slot bracket towards the controller (2) until the plug shells
engage with the cut-outs in the slot bracket connector panel (see circle).
Figure 94: Fastening the slot bracket - D2735
Ê Fasten the slot bracket to the controller with two M3 x 4.5 mm screws.

Table of Contents

Other manuals for Fujitsu PRIMERGY RX100 S7

Related product manuals