Fujitsu PRIMERGY RX100 S7 - Removing the Defective Riser Card; Removing the Expansion Card; Removing the Riser Module 1

228 Upgrade and Maintenance Manual RX100 S7
Expansion cards and backup units
9.4.8.3 Removing the riser module 1
Ê Remove the riser module 1 as described in section "Removing the riser
module 1" on page 209.
9.4.8.4 Removing the expansion card
Ê Remove the expansion card as described in section "Removing the
expansion card" on page 210.
9.4.8.5 Removing the defective riser card
Figure 136: Removing the riser card - slot 3
Ê Remove the two screws (1).
Ê Remove the riser card (2).
0
/
/