358 Upgrade and Maintenance Manual
RX100 S7
System board and components
15.2.3 Replacing the UFM
V CAUTION!
Follow the safety instructions in chapter "Important information" on
page 43.
15.2.3.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Main steps:
– Phillips PH1 / (+) No. 1 screw driver
– long nose pliers
– combination pliers
15.2.3.2 Preliminary steps
Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Locating the defective server" on page 55
3. "Disabling SVOM boot watchdog functionality" on page 76
4. "Disabling BitLocker functionality" on page 75
5. "Shutting down the server" on page 59
6. "Extending/removing the server from the rack" on page 60
7. "Opening the server" on page 64
Field Replaceable Units (FRU)
Additional task duration for uploading "Recovery CD" image:
5 minutes
Average task duration: 5 minutes
To Next Page
Loading...
